SLM Series

SLM030 Standard Specifications

Item Capacity 30W
Model Name SLM030-01
Input Rated Input Voltage AC100V
Input Voltage Range AC90~135V
Frequency Range 48 to 65Hz (rated frequency 50/60Hz)
Input Current Rated input/
output
conditions 		0.9A(typ)
Inrush Current
(see Note 1)		 Rated input/
output
conditions 		20A(max)
Efficiency (typ) Rated input/
output
conditions 		65%
Output
(see Note 2)		 Rated Output Voltage +5V +12V
Output Voltage Variation Fixed
Rated Output Current 2.0A 2.0A (Peak: 2.8A) see Note 3
Output Current Range 0.1~2.0A 0.1~2.0A
Rated Output Power 30W
Ripple Noise (mVp-p)
 Rated input/
output
conditions		 60 150
Constant
Voltage
Accuracy 		Static
Input Range		 AC85~132V ±5% (Ambient temperature range: 0 to +40°C)
Static
Load Range		 ~100%
Time Drift 10min~8hour
Ambient
Temperature
Range		 0~+40°C
Others Output Holdup Time Rated input/
output
conditions 		13ms(typ)
Leakage Current Rated input/
output
conditions 		0.5mA(max)
Additional Functions Over Current Protection Simple short circuit protection
Over Voltage Protection 5.8~6.8V Not provided
Remote Sensing Not provided
Display Not provided
Environmental
Conditions		 Operating Temperature Range 0~+40°C
Storage Temperature Range -25~+80°C
Operating Humidity Range 30% to 90% (no condensation)
Storage Humidity Range 30% to 90% (no condensation)
Insulation Insulation Withstand
Voltage (at normal
temperature and humidity)		 Between Input
and Output,
Between Input
and Frame 		1,500V AC for 1 minute
Between Output
and Frame		 500V AC for 1 minute
Insulation Resistance
(at normal temperature
and humidity)		 Between Input
and Output,
Between Input
and Frame,
Between
Output and Frame		 100MW (measured with 500V DC Megger)
Structure Vibration Resistance (when inactive) 10 to 55Hz, 2.5G, for 1 hour each (vibration in X, Y, Z directions, for 1.5 minutes)
Shock Resistance 10G (3 times each in X, Y, Z directions)
Cooling Requirements Natural air cooling
External Appearance Single printed circuit board
External Dimensions (mm) 140W´90D´35H
Weight (g) Approx. 250
Applicable
Standards		 Safety Standards Designed to meet UL 478 and CSA Electrical Bulletin 1402C
Conducted Emission Designed to meet FCC Class B and VCCI Class B

Note 1: A higher inrush current than the value indicated may flow at restart.
Note 2: Measurements are made at a point 5cm from the output terminal for all output characteristics, with a 63V 47µF electrolytic capacitor attached at that point.
Note 3: Within 15 seconds
* Rated input/output conditions means that the switching power supply is operated within the rated input voltage, rated output voltage, rated output current, and rated frequency, at an ambient temperature of 25°C and 60% humidity.
Top of page