• Overview
• Standard Specifications
• Exterior Views
• Function Codes
• Software functions
• Control terminals
• Protection Alarms

Terminal connection diagram

Note 1: Be sure to ground the inverter and motor.

Note 2: The output terminals are multifunctional terminals that can be assigned individually with function codes Cd638 to Cd640.

Note 3: Terminal for upgrading. Normally leave open.

Note 4: Switch the function with function code Cd002. The terminal can be used as an input terminal for various feedback signals.

Note 5: The input terminals are multifunctional terminals that can be assigned individually with function codes Cd630 to Cd637.

Note 6: DCM1 and DCM2 are digital signal common terminals.

Note 7: The alarm signal output terminals are multifunctional terminals that users assign with function code Cd674.

Note 8: SBT-0.75K/1.5K to 7.5K/11K are equipped with a brake resistor as standard. Open the standard resistor when mounting an external brake resistor.

Note 9: SPF-75K is a standard DC reactor.