HOME > News Release > 2014 > Development of Mixed Signal MCU "MD6602" for Digitally Controlled Power Supplies High-Performance Digital Signal Processors (DSP) for High-Speed Feedback are integrated on the MCU

2014

Development of Mixed Signal MCU "MD6602" for Digitally Controlled Power Supplies
High-Performance Digital Signal Processors (DSP) for High-Speed Feedback are integrated on the MCU

July 18, 2014

Sanken Electric Co., Ltd. has developed a mixed signal microcontroller unit (MCU) "MD6602" that is suitable for digitally controlled power supplies and other applications. Samples of the new MCU are available for shipment beginning mid-October 2014 at 500 yen (tax not included). The production of new MCU will start in March 2015 and 50,000 pieces per month will be shipped initially.

1. Background of Development

To supply stable voltage is the most important function of power sources. In the past, voltage fluctuation has been detected by an analog circuit and corrected by analog feed-back. Now, "digital control" or "digital power management" technology digitizes this feedback process to enhance the controllability of power supply unit. In addition, detailed fine control by software actualizes optimal control of not only voltage but also, current and power. These features comprehensively achieve higher efficiency and intelligent operation through controls by software, thereby contributing to reducing energy consumption and reducing harm to the environment. The new technology has a wide variety of applications.

Against this backdrop, Sanken Electric Co., Ltd. has developed MD6602 as a successor product of its MCU MD6601 for digitally controlled power supplies that has been produced in large quantities by Sanken Electric Co., Ltd. The MD6602 is upper-compatible to its predecessor products and incorporates many more functions. The new product is more user-friendly and enhances the system performance of the sets that incorporate this product.

2. Features

(1) High-Speed Feedback by High-Performance Digital Signal Processor (DSP) for Digital Filter Operation

Several instructions have been added and the program area has been expanded. The new product packs two units of high-performance DSPs featuring parallel operation for high-speed feedbacks.
Computation Example: A 3-ordered IIR digital filter can be operated in 200 ns.

(2) Higher System Performance by DSAC*

The transfer bus width and the number of transfer channels have been doubled. This function automatically transfers data in the register of each module to other modules, enabling automatic transfer of data from an A/D converter to a digital signal processor (DSP) and from the DSP to a pulse width modulator (PWM), for instance. Digitally controlled power supplies without using a central processing unit (CPU) can be configured.

*DSAC: Direct SFR Access Controller

(3) Versatile On-chip Analog Functions

The analog block of the new product integrates two units of high-speed 10-bit A/D converters and a high-precision 12-bit A/D converter. Compared with conventional products, the analog block has been dramatically reinforced. The analog block packs six units of comparators, four units of operational amplifiers and four units of D/A converters. The individual analog modules can be flexibly connected through inter-connections by software configuration.

(4) Three Types of Packages for Mounting on Small Surface Available

LQFP-64 has been newly added to the product lineup of Sanken Electric Co., Ltd. QFN-40 and LQFP-44 are compatible with conventional MD6601.
QFN-40 (Dimensions: 6.0 mm x 6.0 mm, pin pitch: 0.5 mm)
LQFP-44 (Dimensions: 10.0 mm x 10.0 mm, pin pitch: 0.8 mm)
LQFP-64 (Dimensions: 10.0 mm x 10.0 mm, pin pitch: 0.5mm)

3. Applications

Digitally controlled DC-DC converter, AC-DC converter and other applications

4. Overview of Specifications

Item MD6602
Common specification Source voltage 3.3 V (Single power supply operation)
Operating frequency 50 MHz when external crystal is used, 40 MHz when on-chip oscillator is used
Package QFN-40, LQFP-44 and LQFP-64
Analog block A/D converters 10-bit (4 MSPS) × 2 units, 12-bit (1 MSPS) × 1 unit
D/A converters 10-bit × 4 units
Operational amplifier × 4 units
Comparator × 6 units (response time 20 ns)
Voltage generation Reference voltage, middle-point GND, temperature sensor
Digital block CPU 8051/8052 instruction compatible, pipeline processing
Flash memory 32 KB (Protection function provided)
DSP (Digital Signal Processor) × 2 units
PWM (Pulse Width Modulator) 4 units of 2-phase PWM, High resolution (1 ns)
DSAC × 16 channels (Antomatic data transfer between modules)
Copyright SANKEN ELECTRIC CO.,LTD.